Pure Sensia 200D Connect - Manual (Page 26)

24
Static IP address configuration
1. Enter the IP address that you want to assign to Sensia into the IP
Address box.
2. Enter the subnet mask that you want to assign to Sensia into the
Net mask box.
3. Enter the IP address of the DNS server being used on your network.
4. Enter the IP address of your network’s default gateway into the
Router IP box.
5. Tap to save any changes made.
Clearing network settings
If you are having problems with your network connection, you may
need to reset your network settings. To do this, carry out the following:
1. Tap the
Clear icon.
2. The Clear network settings dialogue box will appear. Tap
clear the network settings back to default. Tap to retain the
current network settings.