Pure Twilight - Manual (Page 17)

17
GB
PURE Sounds Select a sound to wake up to.
FM Plays the last FM station tuned to.
Tone Sounds a beeping tone.
6. Set the alarm volume (radio and PURE Sounds alarms only).
7. Set the Lamp time . Lamp time is the length of time the lamp will take
to reach full brightness before the alarm sounds (from No lamp to
1 hour ). For example, setting a lamp time of 30 minutes means the
lamp will switch on and slowly get brighter in the 30 minutes before
the alarm sounds.
8. Tap Save , the icon in the icon bar indicates a set alarm. Alarm
time(s) are also displayed on-screen in standby. An outlined icon
means it is set to skip once.
Snoozing or cancelling a sounding alarm
Snooze an alarm by touching the top of the lamp or tapping Snooze .
The alarm will sound again in nine minutes by default. A snoozed alarm
is indicated in standby by an animated ‘Z’. (See page 19 for snooze
options.) To cancel a sounding or snoozed alarm, press Standby.
Alarm1 set lamp
– No lamp –
OK
10 minutes
No lamp
5 minutes
zz z
07:40
OK