Racing Electronics RE1000 - Manual (Page 2)

ADVANCED OPERATION
NOTE: Use of “F” (Function Key)
The “F” Key is Pressed and held, then the other command key is pressed, then both keys
released. This is just like pushing Shift & a letter on a computer keyboard to capitalize a
letter.
Manual Programming
Create A Car Number: If the car number doesn’t exist in the scanner one must be created.
To create a new car number (Example 24 Car)
24 ENTER, ENTER (The ENTER KEY must be hit twice)
Now that the new car is created, the frequency, name and options can be entered.
Press and hold the “F” and press (the Gear Key)
{Enter Frequency} 4670625 ENTER (the decimal is automatic)
{Enter Name} Using the Alpha Keypad, type JEFF (1st line limited to 4 characters) GORDON
(2nd line limited to 8 characters) ENTER (After 4 letters are entered on the top line the
curser will move automatically to the second line. Use the to move the cursor to the left, the
Scan Key to move to the right. To add a space, use the “0_” Key).
{Enter PL Code} Use the Up/Down arrows to locate 225.7 (If the PL Code listed has a
decimal, arrow up to locate, without a decimal arrow down) ENTER
{Enter Lockout Mode} Use the Arrow Up/Down to turn On/Off ENTER. (Recommended-
Lockout Mode Off).
The scanner is now back to normal listening mode.
Scan List Add/Delete
With the Scan in Off Mode: To add/delete a channel from your Personal Scan List, go to
the channel you want to Add/Delete. Press and hold “F” & Scan. In the display you will
notice either “Scan On” or “Scan Off”. If “Scan On” is displayed, the current channel is part
of your Personal Scan List. If you would like to take it out of your Personal Scan List, Press
and hold “F” & Scan. This display should now show, “Scan Off”
MRN/PRN Mode
With the Scan in Off Mode: To Direct tune to MRN/PRN, Press and hold the “F” Key and
press the MRN/PRN Button. This allows the scanner to REmember MRN/PRN when not in
Scan Mode. When you start Scan, you will be scanning your Personal Scan List, press Scan
again and you will return to MRN/PRN Radio. (Note: MRN/PRN Mode must be turned off to
access an individual driver). This feature allows the user to Scan the list and easily toggle to
MRN/PRN when not scanning.
(continued on the next page)
RACING ELECTRONICS | 840 DERITA ROAD | CONCORD, NC | 28027 | 1.800.272.7111 | www.racingelectronics.com
ADVANCED OPERATION (CONTINUED)
KEY-LOCK
With the Scan in Off Mode: To lock the keypad (all 16 keys)
Press & Hold “F” & Arrow Down To Disable the Key-Lock. Press & Hold “F” & Down
Arrow Again and your buttons become active again.
AUTO-LIGHT
With the Scan in Off Mode: For lighting up the display any time the keyboard is pressed or
the scanner is receiving. (Note: This feature will deplete the battery faster. Not
recommended or necessary for daytime).
Press & Hold “F” & UP Arrow to turn on the Auto-Light feature and Press & Hold “F” & UP
Arrow again will turn Auto-Light Off.
LOCK OUT Mode (Explanation)
With the Scan in Off Mode: Used to eliminate a channel from being accessed using the
Up/Down Arrow or the Scan List, this convenient feature speeds up your scanner. If a driver
is not in the race you are attending, LOCK OUT is a great way to store the information for the
future. (LOCK OUT Mode is set in Programming Mode)
LIMITED WARRANTY
Please take a few minutes to register your RE1000 scanner. Completing product registration
allows us to verify your warranty eligibility.
http://www.racingelectronics.com/registration
@RERADIOZ
FACEBOOK.COM/RACINGELECTRONICS
Get the latest news about RE products and promotions, follow us online at:
4
5
15
16
17
18
2
13
12
3
6
7
1
14
8
9
10
11
BASIC OPERATION
Power Off/On-Volume
The knob on the top of the scanner turns the scanner on/off and adjusts the volume. Push
& hold the “SQ” button on the side of the scanner to turn on the background noise. Tune
the volume to a comfortable level by rotating the Volume Knob.
Scan Off/On
The “Scan” Button turns the Scan feature On & Off. Push “Scan” to Start Scan , Push “Scan”
again to stop Scan. The “Sc” symbol in the display will flash when Scanning and will be solid
when not scanning.
*NOTE: Some of the following operations require the scanner to be set in Scan Off mode.
Quick Tune
With the Scan in Off Mode: To Quick Tune to a particular driver (Example Tony Stewart in
the 14 Car), Press the 1, 4 & Enter Keys. This will change to Car 14.
REmember
The scanner will return to the previous channel when Scan is stopped. If you were listening
to Tony Stewart on car channel 14 and push scan, the scanner REmembers that channel
when you stop scan and will return to that same channel when Scan is pushed again to stop
scan.
Channel Up/Down
With the Scan in Off Mode: The Up & Down Arrows will manually change the channel, one
channel at a time, either up or down. (If the car/driver is not showing up using the Up/Down
Arrow, see “Channel Lockout” in the Advanced Operation Instructions).
REset
Your scanner was pre-programmed with the most accurate frequencies, settings and features.
If you pushed the wrong buttons and made changes to the scanner, you can REset the
scanner to what was initially programmed for the weekend. With the scanner off, simply
push and hold “F” & “SQ” and turn the scanner on and the scanner will REset to the original
programming for the weekend. (Note: Any changes made will be lost and REset to the
earlier Programmed/Cloned settings).