Rosendahl bonsaiDRIVE - Manual (Page 9)

- 16 -
With the menu function activated [MENU] the menu is inserted into
the video picture. See below:
The first green line "
◄ MENU 001 ► " tells you in which part of the
menu you are at present. With the cursor buttons [ ◄ ] and [ ► ] you
can move form one menu heading to the next.
[LOC 1] and [LOC 2] keys increase/ decrease the menu possition to
the next menu group (+10/ -10).
When leaving the menus, the menu position will be stored and
reappear at the same position when the menu is called up again.
The list of parameters that can be altered in each menu are
hightlighted grey and appear under the menu header. The
parameters can be changed by using the [+] and [–] buttons.
The menu in the left picture shows Menu 001 "SELECT CLIP" .
Change the clip number with [+] und [–], and use the [
► ] button to go
to the next menu title.
The information under the menu header are white against a
transparent background and show details about the selected menu
parameter. E.g. MENU 020 "HARDDISK INFO".
The time code burned in at the bottom of the pictures can be altered
in the menu “TC INSERTER" to "LEFT", "CENTER", "RIGHT" or
"OFF".
- 17 -
In general the buttons are used to navigate the menu in the following
way:
[
► ] Select menu increment +1
[ ◄ ] Select menu decrement -1
[LOC 1] Fast menu navigation tab ++
[LOC 2] Fast menu navigation tab --
[+]
Activate selected parameter +1
[–] Deactivate selected parameter -1
[ ■ ] Confirm selection
[ ◄ ] + [RECORD] Confirm erase and format commands
Please consult the detailed menu descriptions in the second,
“firmware” part of the manual.