Sandvik Coromant Silent tools - How to reduce vibration in metal cutting - Manual (Page 30)

Sandvik Coromant – How to reduce vibration in metal cutting 26
Which products have Silent Tools
Bar dia. 10 - 12 mm
CoroTurn 107 and CoroTurn 111 Boring bars
Pre-tuned and easy to use cylindrical boring bars with carbide shaft.
Optimum performance in a split sleeve holder. Do not use screws directly
onto the bar. Shank diameter 10/12 mm and min. hole Ш 13 / Ш 16 mm.
Recommended tool overhang from 6-10 x bar diameter. Integrated tip-seat
pocket designed for T or D style inserts.
Bar dia. 16 - 60 mm
CoroTurn SL Coromant Capto Boring bars & cylindrical boring bars
Pre-tuned and easy to use Coromant Capto cylindrical boring bars.
Coolant through the centre and 570 coupling in front. Coromant Capto
C3-C8 back end coupling. Designed for exchangeable (570) cutting heads.
Recommended tool overhang from 4-10 x bar diameter.
CoroTurn SL Carbide Reinforced Boring bars
Pre-tuned and easy to use carbide reinforced cylindrical boring bars.
Coolant through the centre and 570 coupling in front. Carbide reinforced
for increased static stiffness. Optimum performance in a split sleeve holder.
Do not use screws directly onto the bar. Designed for exchangeable (570)
cutting heads. Recommended tool overhang from 10-14 x bar diameter.
Bar dia. 80-100 mm
CoroTurn SL quick change Boring bars
Pre-tuned and easy to use cylindrical boring bars. Coolant through the
centre and SL quick change coupling in front. Optimum performance in
a split sleeve holder. Designed for exchangeable SL quick change cutting
heads or Ø 40 mm 570 cutting heads. Recommended tool overhang from
0-10 x bar diameter.