Sandvik Coromant Parting and grooving - users guide - Manual (Page 66)

64
Coolant solutions.
The CoroCut SL system
A universal modular system. Intended mainly for internal grooving and external face groov-
ing applications. Focused on Coromant Capto set-ups.
Consists of straight and face grooving blades for external and internal use. Blades for •
CoroCut, Q-Cut 151.3 and 151.2 available.
- CoroCut for face grooving and grooving applications
- CoroCut 3 for economical grooving
- Q-Cut 151.3 for small internal diameters
- Q-Cut 151.2 for deep grooving
- CoroCut XS for precision grooving
Adaptors in 0° , 90° and 45° styles in Coromant Capto and shank holder versions. •
Always mount the bars with shortest possible overhang in order to avoid vibration and •
deflection.
Possibility to mount blades on 570 adaptors, both solid steel and damped bars, in order to •
avoid vibration.
Blades with a coolant connector allow cutting fluid to be concentrated at the back of the •
insert, see drawing below.
Adaptors making it easy to fit coolant tubes both over and under the blades, see drawing •
below.