X Rockers 51476 - Manual (Page 6)

TROUBLE SHOOTING
- Unable to connect to game console -
- Unable to hear any sound from the X Rocker -
Most game consoles are shipped from the manufacturers with an Audio/Video RCA cable. The A/V RCA cable has three
RCA plugs: a video plug (yellow) and two audio plugs (red and white). If your gaming console came with an A/V RCA cable.
please follow the instructions supplied by the manufacturer for setting it up and connecting it to the TV. Please note that
you must leave the red and white audio jacks on the A/V cable UNCONNECTED. Once the console is properly connected to
your TV, please follow the diagram in the illustrated X Rocker Set-up guide to connect the gaming console to the X Rocker.
If your gaming console was shipped with a coaxial cable, instead of an A/V RCA cable, you must follow an alternate set-up
procedure (coaxial cable is the same type of cable that is used to connect a VCR to a TV). You will quickly recognize if your
gaming console uses this type of cable. It connects the gaming console directly to the television and carries both the audio
and video signal over a single cable. If your gaming console uses a coaxial cable, you CAN NOT connect it directly to the
X Rocker . Instead, you must
se an intermediary A/V device (such as a TV, VCR, DVD, TiVO, etc) Please follow these steps:
a. Connect your gaming console to the intermediary A/V device via the coaxial cable.
b. Connect the X Rocker to the 'Audio Out' jack on the intermediary A/V device.
c. Follow diagram 2 in the X Rocker Set-up guide to connect the X Rocker to the intermediary A/V device and
finalize the setup.
If your gaming console is attached to an HD TV with an HDMI cable. You will need to connect the chair using either the audio
out jacks on the back of the TV or by plugging into the headphone jack on the front of the TV.
U
1. Check to ensure that the power adapter is properly connected to the power jack (A5). When properly connected, the
(A2) on the control panel should light up when the power switch (A1) is turned on. If the (A2)
does not light up, try to use another power outlet in your home.
2. Make sure the power unit is turned on and indicator light on the control panel is lit.
3. Once you have successfully completed 1. and 2. please review the illustrated set-up guide. Double check all audio
connections. Finally, check that the volume on the hand remote is turned to an audible level .
indicator light indicator light
If it is not, please press the power
switch on the control panel.
on both the TV and the chair
4. If you have completed 1- 3 and still do not hear sound, try connecting another audio source (CD player,
television, VCR or game console) and go through the steps again. Still not working? Help is as easy as 1,2,3:
1). Please contact Ace Bayou Europe Service Center Via email [email protected].
2). Call +44(0)845 468 0262 to request assistance.
3). Please go to for answers to frequently asked questions
.
X Rocker
Need Help? Email: [email protected] Web: www.thexrocker.com
Phone: 1 931 359 2603, In Europe, call +44 (0)845 468 0262