X Rockers 51344 - Manual (Page 3)

Most gaming consoles are shipped from the manufacturer with an Audio/ Video RCA cable. The A/V RCA cable has three RCA
plugs: a video plug (yellow) and two audio plugs (red and white). If your gaming console came with an A/V RCA cable, please
follow the instructions supplied by the game console manufacturer for setting up your gaming console and connecting it to the
television. Please note that you must leave the red and white audio jacks on the A/V cable UNCONNECTED. Once the console is
properly connected to your TV, please follow the diagram in the illustrated V Rocker Set-up guide to connect the gaming
console to the V Rocker.
If your gaming console was shipped with a coaxial cable, instead of an A/V RCA cable, you must follow an alternate set-up
procedure (coaxial cable is the same type of cable that is used to connect a VCR to the TV). You will quickly recognize if your gaming
console uses this type of cable. It connects the gaming console directly to the television and carries both the audio and video signal
over a single cable. If your gaming console uses a coaxial cable, you CAN NOT connect it directly to the V Rocker. Instead, you have
two alternatives:
- Unable to hear any sound from the V Rocker -
1. Use an intermediary A/V device (such as a TV, VCR, DVD, TiVO, etc) Please follow these steps:
a. Connect your gaming console to the intermediary A/V device via the coaxial cable.
b. Connect the V Rocker to the 'Audio Out' jack on the intermediary A/V device. This allows an indirect connection
of the Pm 550 to your gaming console, through the intermediary A/V device. To accomplish this successfully,
your intermediary A/V device MUST have both:
. A coaxial jack (the standard jack for TV cables that is found on most televisions and VCRs. DVDs, etc).
. An RCA audio output jack ('Audio Out' jack).
c. Follow diagram 2 in the V Rocker Set-up guide to connect the V Rocker to the intermediary A/V device and
finalize the setup.
2. Purchase the A/V RCA cable for your console:
If your intermediary A/V device does not have an 'Audio Out' jack, you must contact the gaming console
manufacturer/dealer and request the 'Audio/Video RCA output cable' for your console. Please note that Ace Bayou Service
Center does not supply this cable for your console. You can obtain it only from the console manufacturer or an authorized
dealer for your gaming console.
1. Check to ensure that the power adapter is properly connected. When properly connected, the logo on the control
panel should light up. If the logo does not light up, try to use another power outlet in your home.
2. Make sure that the power unit is turned on. The "V Rocker" logo power on indicator light on the control panel should
be lit. If it is not, please press the power switch on the control panel.
3. Once you have successfully completed No.1 and No.2, please review the V Rocker illustrated set-up guide and
make sure your audio connections are properly made. If the audio connections are made properly, please check
that the volume on the hand remote is tuned on to an audible level.
4. If you have successfully completed No.1-No.3 and you still cannot hear sound, try to connect another audio source
that works well, such as a CD player, a television, a VCR, another game console, etc.
Please be sure to go through steps 1 through 3 successfully. If you fail to hear any sound after having completed steps
No.1-No.4, please contact Ace Bayou Service Center Via email [email protected] or toll free +1-866-969-2603
+1-931-270-8151 to request assistance.
Please go to www.xfunctional.com for answers to frequently asked questions.
TROUBLE SHOOTING
- Unable to connect to game console -
Need Help? Email: [email protected] Web: www.xfunctional.com
Phone: 931 359 2603, In the UK, call +44(0)208 978 3707 or +44(0)208 978 3708