WeatherHawk Inversion - Wireless - Manual (Page 13)

WeatherHawk ® 10
815 W. 1800 N. Logan, Utah 84321-1784, Email: [email protected] Copyright © 2004, 2010
Toll free in USA: 866-670-5982, International: 435-750-1802, FAX: 435-750-1749 Printed November 2010
3.
Use the provided spikes (three each) to secure the base to the ground (see Figure 12).
4. Insert the coupler from Mast Section 2 into the top of Mast Section 1 (see Figure 13).
Figure 13: Coupler Installed in Top of Mast Section 1
A compass is included in the Tensioning Kit (pn. 22071) to help you properly align the sensors. The
tensioning kit is purchased separately from WeatherHawk.
Figure 12: Spikes Installation