Posey Sound Amplifier - Manual (Page 2)

To Use:
1. Plug the earphones into the Sound Amplifier (fig. 1).
2. Use the volume control dial to turn the unit on and adjust the volume (fig. 2).
To Change Battery:
1. Press down on arrow and slide the belt clip off (fig. 3).
2. With belt clip removed, press down on arrow and slide the
battery compartment door off (fig. 3).
3. Insert a new battery (fig. 3) (LR44, 1.5V Alkaline).
4. Reattach the battery door and belt clip (fig. 3).
AlwAyS verify Sound Amplifier is working properly and volume is not too loud to cause
discomfort or injury when placing the Sound Amplifier on another person.
Cleaning:
Wipe clean with disinfectant liquids that DO NOT contain Phenol. DO NOT submerge in liquid or
sterilize with heat.
Storage Instructions:
• This device is designed for use in normal indoor environments.
• This device may be stored in ambient warehouse temperatures at normal humidity levels. Avoid
excess moisture or high humidity that may damage product materials.
Disposal:
The battery in this product contains mercury and must be recycled or disposed
of according to local, state and federal laws. Dispose of per facility policy for BIOHAZARDOUS
material. Be sure to follow all laws that apply.
Warranty: This product is warranted for 30 days.
Sound Amplifier
Distributed By Posey
5635 Peck Road • Arcadia, CA 91006-0020 USA • Tel: 1.800.447.6739 or 1.626.443.3143
Fax: 1.800.767.3933 or 1.626.443.5014 • www.posey.com
MADE IN CHINA
M6187 REV D 041313 ©2013 Posey Company
Fig. 2
Volume
control and
power on/
off
Fig. 1
Microphone
Earphones
Fig. 3
Belt Clip
Battery
Door
Press
Down
Battery
*8274*
*8274*
8274