Connections, Connecting a tv antenna / cable / satellite, Connecting a digital antenna – Audiovox FPE3208 User Manual

Page 9: Connecting an analog antenna or device, Connecting an a/v device

Advertising
background image

E - 8

CONNECTIONS

CONNECTING A TV ANTENNA / CABLE / SATELLITE

To view television channels correctly, a signal must be received from one of the following sources:
- An indoor or outdoor aerial antenna
- A cable system
- A satellite system

Connecting a Digital Antenna

The tuner in this TV receives ATSC TV signals from an antenna.
This digital TV can receive standard (SDTV) and high definition (HDTV) over the air broadcasts.

Connecting an Analog Antenna or Device

The tuner in this TV receives NTSC TV signals, analog cable signals or the RF output from a satellite
receiver, VCR or cable box.

CONNECTING AN A/V DEVICE

To connect to other equipment such as a VCR, camcorder, satellite system or cable, etc.

Connecting to a VCR / Camcorder / Satellite System / Cable

Connect the AUDIO and S-VIDEO cable (not included) as shown:

Make sure you connect the cable from the other equipment (AUDIO OUT and S-VIDEO OUT) to this unit
AV IN 1 (AUDIO IN and S-VIDEO IN).

NOTE
Please refer to the user
manual for the other
equipment for more
information.

TV

ANTENNA

Satellite, cable or TV

antenna cable to TV

ANTENNA terminal

(cable not included)

AV IN 1

VCR / CAMCORDER /

SATELLITE SYSTEM /

CABLE, etc.

To S-VIDEO OUT /

AUDIO OUT jacks

To AUDIO
IN jacks
(AV IN 1)

To S-VIDEO
IN jack

PLV36320CS11_IB_Eng_1-13.pmd

13/09/2007, 17:27

8

Advertising