Application instructions for quick-release buckle, Application instructions for metal buckle, Inservice video available – Posey Transfer Belts User Manual

Page 2: Posey transfer and walking belts

Advertising
background image

The quick-release buckle should be positioned to the patient’s back so

that the patient can not release the buckle during transfer. Release of the buckle during

transfer may result in injury. ALWAYS verify the buckle is not broken or cracked and holds

securely before transferring the patient.

Application Instructions for the Posey E-Zee closure:

1. With the Posey label facing

away from the patient, wrap the

belt around the patient’s waist

and pass the end through the

first metal ring on the belt.

2. For waists up to 42” (107 cm),

pass the tip through the second

metal ring also. For waists 43”

to 54” (109 cm to 137 cm), use

only the first metal ring.

3. After passing the belt through

the appropriate metal ring(s),

fold it over itself and back in the opposite direction.

4. Secure the hook and loop closure by pressing both sides together firmly.
5. ALWAYS verify proper closure before use. Adjust the belt so it is snug, but not

uncomfortable for the patient. You should be able to slide your open hand (flat)

between the belt and the patient.

Application Instructions for Quick-Release Buckle:

1. Release the quick-release buckle by

pushing inward on the quick-release

buttons.

2. Fit the belt to the patient’s waist size.
3. Once adjusted, wrap the belt around

the patient and snap the buckle shut.

4. Make sure you can slide your open

hand (flat) between the belt and the patient.

5. Turn the buckle around to the patient’s back (tuck excess strap under belt).
6. ALWAYS grasp the transfer belt from underneath. Assist patient using your facility’s

approved procedures.

1. With the Posey label facing

outside, wrap the belt around

the patient’s waist, pass the

metal tip of the belt through the

buckle and over the teeth of the

buckle (Fig. 1).

2.

Bring the tip of the belt across

the front of the buckle and slip

it through the other side (Fig. 2).

Adjust it so it is snug, but not

uncomfortable for the patient.

You should be able to slip your

open hand (flat) between the

belt and the patient.

3. The strap should lay flat across

the buckle. Tuck excess under

the belt (Fig. 3). ALWAYS verify

proper closure before use.

4. ALWAYS grasp the transfer belt

from underneath (Fig. 4). Assist

patient using your facility’s

approved procedures.

Application Instructions

for Metal Buckle:

Fig. 1

Fig. 2

Fig. 3

Fig. 4

This white cotton belt is 5” (13 cm) wide and has three hand

loops, one at each side and one horizontal loop in the

back. The side handles are reinforced with plastic for a

more secure grip. Attaches quickly with plastic quick-

release buckles. Adjustable strap in back for improved fit.

Machine washable.

To maintain bright colors in

non-contaminated Gait and

Transfer Belts:

For all

contaminated Gait and Transfer Belts:

NoTe: Fasten all buckles to minimize damage during wash and dry cycles. Close hook

and loop fasteners before washing to prevent lint build-up. Use stiff metal brush to

clean “hook” material after washing. Test hook and loop adhesion before use, and

discard belt if hook and loop does not hold securely. During the washing, process, metal

buckles could bend and quick-release buckles could crack or break. Do not put buckles

through extractors. Always ensure that all buckles are in good working order and are not

cracked or broken before each use. Customers could expect up to 5% shrinkage in cotton

materials over the life of the product.

Posey Ergonomic Walking Belt

Washing Instructions for Posey Cotton and/or Polyester

Gait and Transfer Belts:

Application Instructions:

1. Center the belt around the patient’s waist with the

quick-release buckles in the center front and the rear

adjustment strap at the top of the belt.

2. Adjust the belt to fit so it is snug, but not

uncomfortable for the patient, and close it with the

hook and loop fastener. You should be able to slide your

open hand (flat) between the belt and the patient.

3. Secure the quick-release buckles and tighten the straps so that they lie flat.
4. Tighten the cotton strap in the rear of the belt until it fits snugly in the waist area.

Make sure the strap and buckle lie flat against the belt.

FRONT

BAck

Inservice Video Available!

The Proper Use of Posey Gait and Transfer Belts” is a 15

minute video that demonstrates the proper application

of Posey Transfer and Walking Belts. Available in both

DVD (REF 8508D) and VHS (REF 8508) formats, the video

reviews nine basic rules for successful transfers and

three common transfer procedures.

Posey Transfer and Walking Belts

Ref #

Fits Waists

handles

Buckle

Rear Band

REF

6537DX

30” to 66” (76 cm to 168 cm)

7

Metal

6” (15 cm) wide

REF

6537QDX

30” to 66” (76 cm to 168 cm)

7

Quick-Release 6” (15 cm) wide

REF

6537

28” to 52” (71 cm to 132 cm)

6

Metal

4” (10 cm) wide

REF

6537Q

28” to 52” (71 cm to 132 cm)

6

Quick-Release 4” (10 cm) wide

6537Q

6537QDX

Posey Transfer and Walking Belts offer

caregivers added support with multiple easy

to grasp hand loops. The belt is made of

machine washable black nylon webbing with

green nylon hand loops. Belts are available

with nickel-plated or quick-release buckle

closures.

6537QDX

Deluxe

Economy

Ref No.

Size

Fits Waist

REF

6534S

Small

26” to 34” (66 cm to 86 cm)

REF

6534m Medium

33” to 38” (84 cm to 97 cm)

REF

6534L

Large

36” to 45” (91 cm to 114 cm)

REF

6534XL X-Large

44” to 52” (112 cm to 132 cm)

Advertising