Opening your veriton 6800/7800, To remove the side panel – Acer 6800 Series User Manual

Page 48

Advertising
background image

4 Upgrading your computer

42

Opening your Veriton 6800/7800

Caution! Before you proceed, make sure that you have turned off
your computer and all peripherals connected to it. Read the
"Preinstallation instructions" on page 39.

You need to open your computer before you can install additional components.
See the following section for instructions:

To remove the side panel

1

Turn off your computer and unplug all cables.

2

Place your computer on a flat, steady surface.

3

Turn the screws counterclockwise with your fingers to release the cover.

4

Hold right panel (from rear view) with both hands. Slide it back about an
inch and then gently pull it outward to detach it.

Veriton 6800

Advertising
This manual is related to the following products: