Figure 19, Battery in the casing, Figure 20 – Vaisala RS92-KL User Manual

Page 31: Connecting the battery connector to the radiosonde

Advertising
background image

Chapter 3 ________________________________________________________________ Operation

VAISALA_______________________________________________________________________ 29

4.

Take the battery out of the water after four minutes of immersion.
Do not squeeze water out of the battery.

5.

Put the battery back into the casing. One end of the battery is waxed
to prevent leakage. The waxed end should point downwards.

0705-041

Figure 19

Battery in the Casing

6.

Connect the battery connector to the radiosonde.

0710-109

Figure 20

Connecting the Battery Connector to the
Radiosonde

7.

The radiosonde has now been activated. Close the battery casing.

Advertising
This manual is related to the following products: