Operation and verification – HighPoint NA333TB User Manual
Page 3
3.
Verify HighPoint Thunderbolt
TM
target card is recognized
by HOST. Click the Apple icon on top left of the screen,
and select
About This Mac, and then select More Info.
Next, select
System Report, and select Thunderbolt
TM
on left side of the pane of System Information.
Select
NA333TB to see information about HighPoint
Thunderbolt
TM
target card.
6.
Operation and Verification
5. Verify the drivers of RAID controller card and PCIe cards are installed.
When you see all the PCIe cards listed on the last step, there will be
a column
Driver Installed indicating the status of the drivers of the
PCIe cards. If the status shows “No”, please find and install the
Thunderbolt
TM
-aware driver of the PCIe card, and then the status
will show “Yes”.
6. After verifying that the driver of the RAID controller card is installed,
please follow the operation procedure indicated by the RAID HBA.
7. While the NA333TB chassis is connected to HOST by
Thunderbolt
TM
cable, when shutting down the HOST, the
NA333TB will be shut down simultaneously as well.
The following verification steps are for Mac OS only.
When verification steps for Windows operating system become ready,
they will be added.
1. When NA333TB is connected to the power source with two
power cords connected to the PSU of NA333TB, turn on the
two power switches on the PSU. (namely, turn the switches to
position “I” for enable on power supply)
2.
The NA333TB is designed to be powered on and be powered off
simultaneously with the HOST when NA333TB chassis is
connected to HOST by Thunderbolt
TM
cable.
Therefore, power on the HOST first, and then the NA333TB will be
powered on automatically. (NA333TB supports hot-plug and
hot-unplug for powering-on and powering-off)
4. Verify the PCIe cards installed inside NA333TB.
After seeing information on HighPoint Thunderbolt
TM
target card,
click
PCI Cards on left side of the pane of System Information, and
then you will see all the PCIe cards listed. (For RAID controller card,
from starting up, it will take more time for its info to be shown)
If you have any questions, please contact your regional
distributor, or HighPoint Technologies, Inc.
Notice: The NA333TB chassis supports SGPIO. When any HDD fails, the
red LED indicator on that tray will light. The SGPIO function will be effective
when the SAS/SATA RAID HBA supports SGPIO function. (For instance,
Areca’s RAID controller card)
(Take redundant PSU edition for example)
turn the switches to
position “
I ”
Thunderbolt
TM
cable
Step 3.1
Step 3.3
Step 3.4
Step 3.2
HighPoint Technologies, Inc.
E-mail: [email protected]
Phone: (408) 240-6108 (Monday~ Friday, from 9am~6pm)
Skype: Highpoint.Thunderbolt