HighPoint RocketRAID 4310 - Manual (Page 7)

Congratulations
Advanced RAID Features
7
Array Monitors, Alerts and Indicators
HighPoint RAID Management (HRM)
•
Supports RAID 0,1,3,5,6,10,50 and JBOD
•
Multiple RAID array support
•
Multiple logical drive support
•
BIOS booting support
•
BIOS PnP and BBS (BIOS boot specification)support
•
Write through and write back cache
•
Online Array roaming
•
Online capacity expansion (OCE) and Online RAID level migration (ORLM)
•
Quick and Background initialization for instant RAID configuration
•
Automatic RAID rebuild
•
64bit LBA support greater than 2TB per volume
•
S.M.A.R.T monitoring hard drive status for reliability
•
Staggered Drive Spinup
•
(MAID) spin down drives in array when idle
•
ATA pass-through mode support
•
Firmware update while running the Operating System
•
SMTP for email notification
•
Hardware Monitor function(RocketRAID 432x)
•
Alarm / Buzzer alerts for drive failure
•
SAF-TE (I2C) and SGPIO enclosure management (RocketRAID432x/4310)
SAF-TE(I2C) enclosure management (RocketRAID 4311)
•
SNMP for remote management(RocketRAID 432x)
•
Ethernet port for (OBM) Out of Band Management (RocketRAID 432x)
•
NTP (Network Time Protocol)(RocketRAID 432x)
•
Intelli-VRM. (Intelligent Virtual RAID Management)
•
SHI – Storage Health Inspector (S.M.A.R.T. and disk maintenance)
•
Hot key (ctrl-h) boot-up RAID manager via BIOS
•
Web browser-base RAID management software
•
Command Line Interface (CLI)
•
API library for customizing AP