HighPoint RocketRAID 2302 - Manual (Page 49)

RocketRAID 230x Driver and Software Installation
Add a Connection
This command is used to add new connection to a remote system. To Add a
Connection:
1. Highlight the “File” menu, and select the “Remote Control” function.
2. Click the Add button on the toolbar or select the “Add” command from the “Opera-
tion” menu.
3. Enter the system address, name, and port information in the popup window.
The system address can be a host name, or an IP address. The default system port is
7402.
4. Click “OK” to finish adding the new connection.
Modify a Connection
This command modifies connection information for a remote system. To modify a
connection:
1. Highlight the “File” menu and select the “Remote Control” function.
2. Highlight the system you want to modify.
3. Click the Modify button on the toolbar or select the “Modify” command from the
“Operation” menu.
4-20