HighPoint RocketRAID 2240 User Manual
Page 41
The system address can be a host name, or an IP address. The default system port is
7402.
4.
Click “OK” to finish adding the new connection.
Modify a Connection
This command modifies connection information for a remote system. To modify a
connection:
1.
Highlight the “File” menu and select the “Remote Control” function.
2.
Highlight the system you want to modify.
3.
Click the Modify button on the toolbar or select the “Modify” command from the
“Operation” menu.
4.
Enter new connection information in the pop-up window, and click OK to apply
the changes.
Note: The System Address cannot be modified. If you insist on modifying this item,
you must first delete this connection and then add a new connection. In addition, the
connected system cannot be modified – you must first disconnect from this system.
Delete a Connection
This command deletes a remote system from the connection list. To delete a
connection:
RocketRAID 2240 Driver and Software Installation
4-21