VHT The Standard 12 - Manual (Page 4)

3. On/Off : Use this switch to turn the AC power on or off.
4. Indicator Light (Red): LED will be lit when the amplifier power is on.
5. Tone: Adjusts the tone characteristics of the amplifier (Global)
6. Volume 1: Volume adjustment for Channel 1 (Bright Channel). Turn this knob clockwise increases the overall sound level.
7. Volume 2 : Volume adjustment for Channel 2 (Normal Channel). Turn this knob clockwise increases the overall sound level.
CH 1:
8. Lo: Bright Channel - Connect the cable from the instrument’s output jack to this jack. This jack is provided for instruments that have extremely
high outputs (i.e., active pickups) that can result in distortion when connected to the HIGH INPUT JACK. Always use an undamaged, shielded
instrument cable.
9. Hi: Bright Channel - Connect the cable from the instrument’s output jack to this jack if it has an average output (i.e., Strat-Style and Les
Paul-Style guitars). Always use an undamaged, shielded instrument cable.
CH 2:
10. Lo: Normal Channel - Connect the cable from the instrument’s output jack to this jack. This jack is provided for instruments that have
extremely high outputs (i.e., active pickups) that can result in distortion when connected to the HIGH INPUT JACK. Always use an undamaged,
shielded instrument cable.
11. Hi: Normal Channel - Connect the cable from the instrument’s output jack to this jack if it has an average output (i.e., Strat-Style and Les
Paul-Style guitars). Always use an undamaged, shielded instrument cable.
B. THE REAR PANEL
Fig. 2: The Rear Panel
12. Internal Speaker Jack: Plug-in connection for the 8Ω internal speaker. A speaker must always be connected at this jack when the amplifier is ON.
A speaker impedance load of 8Ω should be used to avoid distortion or damage to the amplifier.
13. Line Out: This is a padded output of the speaker signal at line level. Speaker must be connected.
14. Power Cord: Connect to a grounded A/C outlet in accordance with the voltage and frequency ratings specified for your amplifier.
14
13
12
6 7