Document Outline

• LGPB-IM.pdf
  • Table of Contents
    • GENERAL DESCRIPTION 5
      • Block Diagram 5
      • Safety Summary 6
      • Basic Operation 6
      • Messages 8
        • User Input Message Request Operation 8
        • Binary Message Request Operation 8
        • Output Message Request 8
        • Message Cancellation 8
      • Overflow Indication 9
      • Peak & Valley 9
      • Normal Operating Mode 9
      • Keypad Description 10
        • Keypad Functions 10
        • Program Code Number (PRO.CODE) 11
      • Front Panel Accessible Functions With Program Disable 11
    • PROGRAMMING GENERAL DESCRIPTION 12
      • Program Presets & Counter Load Module 13
        • Preset Values 13
        • Counter Load Value 13
      • Program Scale Factors Module 14
        • Count Scale Factor 14
        • Rate Scale Factor 14
        • Total Scale Factor 14
    • PROGRAMMING MENUS 15
      • Program Scaling Module 16
        • Count Scale Factor (COUNT SF) 16
        • Rate Scale Factor (RATE SF) 16
        • Total Scale Factor (TOT SF) 16
        • Count Scale Multiplier (CNT.SCM) 16
        • Rate Scale Multiplier (RATE SCM) 16
        • Rate Conversion Factor (RATE PER) 16
        • Decimal Point (CNT. DP, RATE DP, TOT DP) 17
        • Change Count Value With Scale Factor (CHG CNT W/SF) 17
      • Program Rate Module 18
        • Minimum And Maximum Update Time 18
      • Program Counter Module 19
        • Count Modes (CNT. INPUT) 19
        • Process Reset Action (PRC. RST.) 20
        • Process Automatic Reset (P AUTO.RS) 20
        • Batch Reset Action (BAT. RST) 21
        • Batch Automatic Reset (B AUTO. RS) 21
        • Total Reset Action (TOT. RST.) 21
      • Program User Module 22
        • Binary Message Request (BIN MSG REQ) 22
        • No Mode 23
        • Maintained Reset (MNT RST) 23
        • Momentary Reset (MOM RST) 23
        • Reset Output (RST OUT) 23
        • Set Output (SET OUT) 23
        • View/Freeze Display (VIEW DS1) 23
        • Change Display (CHG DSP) 24
        • Request Message (REQ MSG#) 24
        • Clear Message (CLR MSG) 24
        • Skip Preset (SKIP PRS) 24
        • Counter Load (CNT LD) 24
        • Print Request (PRINT RQ) 24
        • Program Disable (PGM.DIS.) 24
        • Inhibit Count 24
      • Program Outputs Module 25
        • Phase 25
        • Output Modes - Timed, Latched or Boundary 25
        • Rate Output On/Off Delay 25
        • Output End (Reset) Modes - OUT1 END, OUT2 END 27
        • Output Power Up State ([email protected], [email protected] OR ON @P.UP) 27
        • Reset Output With Count (RST/C-EN OR DS) 27
        • Request Message (REQMSG#—) 27
      • Program Display Module 28
        • Displays 1 to 4 28
        • Scroll Speed (SCRO.SPD) 28
        • Display Intensity (DSP.LEVEL) 28
        • Custom Display Lines (CUST.DSP.1 / CUST.DSP.2) 28
        • Mnemonic 28
      • Program Message Module 30
        • Message Type 30
        • Message Text 31
        • Message Priority (PRIOR - 1) 33
        • Blinking Message (BLNK-YES/NO) 33
        • Multiplex (MUX - YES/NO) 33
        • Maintained/Momentary Message Request 33
        • Message Cancellation 33
        • Message Time 33
        • Message Color 33
      • Program Communication Port 34
        • Baud Rate 34
        • Parity/ Number Of Data Bits 34
        • Unit Address 34
        • Serial Transmit Delay 34
      • Program Print Options Module 35
        • Mnemonics (MNEM-Yes/No) 35
        • Transmit and Reset (TX&R-Yes/No) 35
        • Message 0 (MSG0-Yes/No) 35
      • Program Options Module 36
        • Operator Access 36
        • Preset Tracking 36
        • Program Code (PRO. CODE) 36
        • User Settings 37
        • LGPB Factory Settings Program Sheet 37
        • LGPB User Settings Program Sheet 39
    • SERIAL COMMUNICATIONS 42
      • Programming Software 42
        • Installing Software 42
        • Using Software 42
      • Communication Format 43
      • Sending Commands and Data 43
      • Receiving Data 46
      • Serial Connections 47
        • Connecting to a Host Terminal 48
      • Troubleshooting Serial Communications 49
    • INSTALLATION & CONNECTIONS 50
      • EMC Compliance Installation 51
      • Additional EMC Installation Guidelines 51
      • Wiring Connections 52
        • A.C. Power Wiring 52
        • DC Power Wiring 52
        • Serial Communications 52
      • User Input Wiring 52
      • Output Wiring 52
      • Signal Wiring 53
        • Inputs A & B 53
      • Installation & Removal of Relay Board 54
      • DIP Switch Set-up 54
      • Various Sensor Output Connections 55
    • SPECIFICATIONS & DIMENSIONS 57
    • TROUBLESHOOTING GUIDE 59
    • APPENDIX “A” - SCALING FOR COUNT AND TOTAL INDICATION 62
      • Scaling For Count Indication 62
      • Count Scale Multiplier 63
      • Scaling For Total Indication 64
    • APPENDIX “B” - SCALING FOR RATE INDICATION 65
      • Rate Scale Multiplier 66
    • APPENDIX “C” - APPLICATION 68
    • APPENDIX “D” - ORDERING INFORMATION 71