ARI Armaturen Condensate PN40 EN - Manual (Page 11)

Rev. 0040807001 2404 Page 11
Operating and installation instructions
Condensate discharge temperature limiter
7.4 Tightening torques
(refer to Fig. 1 page 4 - Fig. 5 page 10)
8.0 Troubleshooting
In the event of malfunction or faulty operating performance check that the installation and
adjustment work has been carried out and completed in accordance with these Operating
Instructions.
If malfunctions cannot be eliminated with the help of the following table
“9.0 troubleshooting table”, the supplier or manufacturer should be consulted.
Pos.
Condensate discharge
temperature limiter PN40
Torque (Nm)
6 Screw cap 100
24 Controller 80
8 Strainer plug 70
43 Plug 70
46 Blow down valve 70
46.1 Pressure screw 15
47 Thermoter adapter 50
47 Thermometer 50
-
ATTENTION !
It is essential that the safety regulations are observed when identifying faults.