ARI Armaturen ARI-PACO 1,6kN EN - Manual (Page 18)

Page 18 0040506001 1811
Operating and installation instructions
Electric thrust actuator ARI-PACO 1,6 kN
6.0 Putting the actuator into operation
6.1 Putting the actuator into operation ARI-PACO 1,6 D
- Actuating direction ARI-PACO 1,6 D
- Actuator components which rotate or move during operation.
Crushing or injury hazard!
Before putting a new plant into operation or restarting a plant after repairs or
modification, always make sure that:
- all works has been completed!
- Regional safety instructions must be observed as a matter of policy.
- hood of thrust actuator assembled.
ATTENTION !
- Before any commissioning, the correct insertion of the valves as well as the
electrical connections should be checked.
Bild 13
Drive cluth moves IN Drive coupling moves OUT
Connection earth
(connector 1) - connector 2
Connection earth
(connector 1) - connector 3
press and turn 90°