Altinex MULTI-TASKER MT109-102 - Manual (Page 26)

MULTI-TASKER™
400-0343-003 25
25
8.3 SOUND DISTORTION
Cause 1: Source level is above 0.7Vp-p.
Solution1: Make sure that the source level is
below 1V p-p. If the sound is still
distorted, see Solution 2.
Solution 2: Call ALTINEX at (714) 990-2300.
8.4 SOUND LEVEL IS LOW
Cause 1: Volume levels are inappropriate.
Solution 1: Turn up the source volume. If sound
level is still low, see Solution 2.
Solution 2: Turn up the destination amplifier
volume. If the sound level is still low,
see Cause 2.
Cause 2: Poor signal transmission.
Solution: Check the cables for continuity and
make sure that connections are
wired properly to verify that there is
good signal transmission. Note:
Test the system by removing the
card from between the source and
the destination amplifier. If the
problem persists, call ALTINEX at
(714) 990-2300.
ALTINEX POLICY 9
9.1 LIMITED WARRANTY/RETURN POLICY
Please see the Altinex website at
www.altinex.com for details on warranty and
return policy.
9.2 CONTACT INFORMATION
ALTINEX, INC
592 Apollo Street
Brea, CA 92821 USA
TEL: 714 990-2300
TOLL FREE: 1-800-ALTINEX
WEB: www.altinex.com
E-MAIL: [email protected]