High Country Tek DVC741 - Manual (Page 5)

DVC741 Product Manual
High Country Tek, Inc.
208 Gold Flat Court
Nevada City, CA, 95959.
Tel:- (1) 530 265 3236
www.hctcontrols.com 021-00195_Rev_A-DVC741_User_Guide 5/6
PACKAGING
A. Physical Size : 6.2” L x 4.75” W x 1.65” H encapsulated module.
B. Each module has two mounting holes 4.0” apart. Each mounting hole has an I.D.
of 0.325”.
C. Weight: 1 lb. 6 oz.
CONNECTORS
A. The main connector on the DVC741 is a Cinch 1.5 mm SHS series (or
compatible) sealed electronic header designed for severe under-hood
environments. IP69K
B. Then CAN Bus connector on the DVC741 is a standard 5-pin M12 type CAN Bus
(DeviceNet compliant) connector.
MATING CONNECTORS
A. Mates to the 30-pin Metri-Pak Connector (P8):
1.
DVC Series 30-pin Connector Kit HCT P/N: 999-10085
Includes the following:
1 - Connector, 30-pin (P8)
30 – Terminals 18 AWG
20 – Plugs
B.
Mating for CAN Bus connector (P9)
1.
5-pin Female M12 DeviceNet compliant connector.
C. Mating to the RS-232 Port – The RS-232 port is accessed through the 30-pin
connector at (P8). A DVC Serial Port Adapter is available to connect to the 30-pin
Female mating connector. A DVC RS-232 Cable can be used to interface from the DVC
Serial Port Adapter to a PC. Drawings for these two cables are supplied for user
assembly; otherwise they are available from HCT.
* Note: The DVC Serial Port Adapter comes with a plug. The plug is used to keep the
cable weather-tight when not connected to peripherals.
1.
DVC Slave Serial Port Adapter HCT P/N - 999-10082
2. DVC RS-232 Cable Assembly HCT P/N - 999-10075
ENVIRONMENTAL
• Operating Temperature -
-40 Celsius to 70 Celsius
• Storage Temperature - -40 Celsius to 85 Celsius