High Country Tek HFS-2Q - Manual (Page 20)

Hydraulic Fan System Controller : HFS - 2
Software Set-Up Guide ( Menu Bar ):
At ‘OEM’ and ‘Factory’ password levels only, Clicking the
Trouble Codes tab allows the user to observe a log of any
OPEN or SHORT circuit error codes that have been triggered
and stored.
The currently displayed event log can be reset from both of
these levels.
Event times and number of occurrences are NOT recorded,
rather that the error occurred at least once from the last log
at e t at t e e o occu ed at east o ce o t e ast og
reset.
At ‘OEM’ password level only Clicking the Permanent Log tab
A
At ‘OEM’ password level only, Clicking the Permanent Log tab
allows the user to observe list of ‘Stored’ data that indicate the
maximum levels that the controller has ever seen from
initiation:-
1. The ‘Unit Serial Number’ is unique to every controller.
2. The ‘Motor Serial Number’ is entered at
commissioning if required.
3 ‘Date First Set Up with PC’ is the ‘Born Date of the
• At ‘OEM’ password level only, items 2,3
can be observed and reset.
3. Date First Set Up with PC is the Born Date of the
controller for warranty uses.
4. Thermistor 1 – 3 Highest temperatures ever seen.
5. ‘Unit Highest Temp’ is the actual controllers internal
temperature max. reading.
6. ‘Power Supply Highest Voltage’ is the maximum
supply applied to the controller.
• At ‘Factory’ password level only, items 2,3
and 4 can be observed and reset.
Clicking this button starts the data logging process.
ALL of the parameters available in the item drop down menu as well as other profile settings are
logged for a period of 255 samples . After the logging period, a popup window asks for file name and
storage location.
Thi fil i d ith * t i hi h ll di t i t di d hi i Mi ft
A
20
This file is saved with a *.csv extension which allows direct import, reading and graphing in Microsoft
Excel.