VariZoom VZCINEMAPRO-K4 - Manual (Page 13)

Advanced Controller connectors (not pictured)
CTRL - 7Pin LEMO – Head control cable (green)
SERIAL - 8pin LEMO – TOC or Preston Lens Drive Hand Units (gray)
ANALOG - 5pin LEMO – Pan Bars zoom & focus controls (white)
WHEELS - 6pin LEMO – Handwheels or Pan Bars Control Input (blue)
BLOOP - 6pin Fischer
VIDEO SYNC – BNC connector
Appendix
Power Supply Connectors
1) Power Connector – XLR4F
Pin Function Wire Color
1 Camera Neg. Black
2 Cinema Pro Neg. White
3 Cinema Pro Pos. Red
4 Camera Pos. Green
2) Camera Power Connector
Pin Function Destination
1 Camera Neg. Loop to Power Connector
2 N.C.
3 N.C.
4 Camera Pos. Loop to Power Connector
*** WARNING: DO NOT POWER THE CINEMAPRO WITH ANYTHING OTHER THAN THE
INCLUDED FACTORY POWER SUPPLY OR YOUR WARRANTY MAY BE VOIDED. THE
UNIT MAY BE SEVERELY DAMAGED AND CAUSE DAMAGE TO YOUR CAMERA IF YOU
USE A NON-APPROVED POWER SUPPLY. IF YOU MUST POWER IT USING A BATTERY
SYSTEM, MAKE SURE THE SETUP IS APPROVED BY VARIZOOM AND EXECUTED BY A
QUALIFIED TECHNICIAN.