VariZoom VZSTINGRAY User Manual
Page 4
WARNINGS:
1) Always tighten all locking knobs and attach rod endcap screws before operating
the unit – failure to do so could result in accidental separation of components
and damage to your camera.
2) Always tighten the locking knobs on the suspension pod when storing and handling.
Only unlock the knobs when the suspension pod has been properly mounted into the
belt holster and the articulated socket on the fully assembled StingRay/Stinger
camera support. Also make sure the endcap screw is attached to the short
mounting rod on the articulated socket.
Setup and Configuration
The RigLit system allows for great flexibility in how your support can be configured
and adjusted. We recommend using the systems in one of the 5 configurations
depicted in this manual. You should be able to assemble the system by using this
manual as a visual guide.
If you are using one of our RigLits to upgrade a support from another
manufacturer, please make sure you continue to adhere to any warnings or special
instructions given by the manufacturer.