VariZoom VZ702M User Manual

VariZoom Monitors

Advertising
background image

VZ-702M Lithium-Ion Battery Kit for

VZ-TFT Monitors

Kit includes:






12V DC / 1A Step-up Cable (connects battery to monitor)

Warnings:

-Charge the battery pack only with the included AC adapter AND charging interface cable. Improper charging
may result in damage or unsafe conditions.
-Do not expose the battery kit to moisture. Store only in a dry, cool place.
-Do not leave the battery kit in the sun for prolonged periods or charge it in direct sunlight.
-Do not attempt to disassemble the battery or other parts of the kit.
-Do not use the kit if the connecting wires are frayed or damaged.
-Do not enclose, wrap, tape or cover any of the components, as they produce heat. Obstructing the flow of air
around the components may cause them to overheat.

Features:

-

5 LED battery life indicator (push button to check remaining battery life)

-

Charging interface cable with LED indicator (Red-charging / Green-fully charged)

-

Battery has integral ¼”-20 screw and bottom thread-mount for sandwiching battery between TFT
monitor and on-camera swivel shoe mount (also enables double stacking of batteries).

-

Dual-purpose AC adapter for charging battery (with interface cable) or for powering VZ-TFT monitor
directly from AC socket.

Charging:

1. Charge the battery before first use. Plug the

output connector of the AC adapter (or car
adapter) into the charging interface cable (A), and
then plug the AC adapter into a 110-120V AC
power outlet (or plug the car adapter into the
outlet/cigarette lighter).

2. Now plug the output connector of the charging

interface cable into the socket on the battery (B).
The LED indicator on the charging interface cable
will glow Red to let you know it is charging. Once
charging is complete, the LED will turn green and
you should disconnect the battery.

A

B

Advertising