Videoswitch VCM - Manual (Page 5)

Duplex Multiplexers
User Manual Page 5
____________________________________
Videoswitch
VCM614d.doc
1.4 Step 4 - Identification of Switches
Identify where the switches are on the underside of the multiplexer as illustrated in this diagram.
A 20-camera multiplexer is used in this example. Other models are similar but have fewer
termination switches.
1.5 Step 5 - Time-Lapse Mode Switch (S1)
Set this switch to suit the time lapse mode of the VCR or to specify whether a step cable is being
used. For example, set to position 4 for 24 time-lapse operation without a step cable. Refer to
section 3.1 and section 3.2 for details.
1.6 Step 6 - Set-up Options Switch (S2)
Set this switch to specify the basic set-up options. In most installations, the default setting of all
sections OFF, will be required. Refer to section 3.3 for details.
1.7 Step 7 - Camera Termination Switches (S3, S4, S5, S6 and S7)
Set these switches ON if camera termination is required. In most installations the default setting of
all sections ON will be required. Refer to section 3.4 for details.
1.8 Step 8 - SET key options
Further options are available by using the SET key in combination with other keys. In many cases it
is not necessary to access these facilities. Refer to section 4 for details.