Audiovox PROVE8 - Manual (Page 5)

Main Function Descriptions
1. DVD disc insertion slot.
2. Infrared Transmitter and Sensor – Use to transmit audio to wireless headphones. Also allows the remote
control to operate the PROVE8 and to control other accessories in the system.
3. PLAY ( ) Button – This button is used to enter the play mode.
4. FWD ( ) Button – Allows the user to search in a forward direction at 2, 4, 6 and 8 times the normal speed.
5. STOP ( ) Button. - Pressing this button once will stop playback at the current position; pressing this button
twice will return to the beginning of the disc.
6. PICTURE SELECT Button – Each time this button is pressed, the on screen picture adjustment display
cycles through “adjustment bars” for BRIGHTNESS, CONTRAST, COLOR, and TINT. Once the desired
adjustment bar is displayed, use the VOLUME UP/DOWN buttons to adjust the setting. The display will
automatically turn off if no adjustments are made within 6 seconds, or if any other button is depressed.
7. VOLUME DOWN (-) Button – Use this button to decrease the volume level of the headphone jacks. It is also to
make picture adjustments in picture select mode.
8. VOLUME UP (+) Button – Use this button to raise the volume level of the headphone jacks. It is also used to
make picture adjustments in picture select mode.
Note: These buttons will not affect the volume of wireless headphones or the wired RF modulator. When using
these devices the volume must be adjusted with the wireless headphone volume control or with your radio’s
volume control (see page 16, Wireless Headphones, or page 17, Wired FM Modulator).
9. Three position Dome Light Switch
•
Auto – Automatically switches on the dome lights in conjunction with the vehicle’s interior illumination.
•
Off – The dome lights will not turn on in this position.
•
On – Turns on the dome lights.