Videoswitch VK-2 - Manual (Page 81)

VK-2 Universal Keyboard
VK-2 Universal Keyboard User Manual
78
21 Pin-Out Reference
21.1 Connector Arrangement
Viewing the VK-2 from the rear, the connectors are arranged in this order:
12V Power
Input
Monitor
Output
RS232
Input
DOMES-2
Output
DOMES-1
Output
VK Input VK Output
21.2 12V DC Power Input (2.1mm Inlet)
With a CAT5 connection to a Videoswitch Digital Recorder, this power input is not required (for cables runs
up to about 200 metres).
Pin Description
Inner Pin +12V DC (Range: 9V to 15V), 200mA maximum
Outer Sheath GND
21.3 Monitor Output (BNC)
With a CAT5 connection to a Videoswitch Digital Recorder, with a cable length up to about 200metres, a
monitor may be connected to this BNC connector. For longer runs, a separate coax cable may be required
for the monitor.
Pin Description
Inner Pin Composite Video (PAL)
Chassis GND
21.4 RS232 (9-way female D-type, DCE)
The RS232 input is provided for firmware upgrade from a PC. Contact Videoswitch for details.
Pin Signal Name Usage
2 RXD RS232 Output
3 TXD RS232 Input
5 GND Ground