AVC Technology LC-45GX6U - Manual (Page 65)

64
NOTE
• Even when a connected D-VHS deck is playing, input
signal can be switched to digital broadcasting by shifting
the cursor to the input selection button and pressing
ENTER.
• This System may not be able to operate some D-VHS
decks using the control panel, or to display picture and/
or sound input from some D-VHS decks.
• Depending on the D-VHS deck, this System’s i.LINK may
not allow viewing of VHS and S-VHS tape or analog
recorded D-VHS tape. In this case, connect the D-VHS
deck’s analog output with the System’s analog input, and
switch the System’s input mode to external input.
• If a D-VHS deck is operated with the System’s control panel
during timer recording, the recording may fail. Do not use
the System’s control panel to operate the D-VHS deck
during timer recording.
• When the System’s control panel is used to record a
program, what is recorded with the D-VHS deck are the
pictures and sound of the digital program that the System
is receiving.
• To record the picture and sound of a digital program which
the System is receiving, use D-VHS tape. VHS or S-VHS
tape will not record.
• The i.LINK control panel cannot be used during timer
recording.
• There may be some programs which D-VHS decks cannot
record.
• With some D-VHS decks, the quality of the picture may
be distorted during fast forwarding or rewinding.
• IEEE 1394 is the IEEE’s international standard.
• i.LINK and the i.LINK logo are registered trademarks of
Sony Electronic, Inc.
• A copy protection technology is used on D-VHS decks
that incorporate copyright protection. This technology has
received the approval of the Digital Transmission Licensing
Administrator (DTLA), an organization that administers
copyright protection technologies. Some picture and
sound data have restrictions on duplication. Such data
cannot be digitally copied using the i.LINK. Some picture
and sound data may not be able to be sent back and
forth between a D-VHS deck that has DTLA copyright
protection technology and one that does not.
Using external equipment
Automatic input switching to i.LINK
• Input mode can be set to automatically switch to
i.LINK when a D-VHS deck connected to the System
is played.
Press MENU to display the MENU screen.
Press c/d to select “Digital Setup”, and then
press ENTER.
Press a/b select “i.LINK Autoswitch”, and
then press ENTER.
1
2
4
Press c/d to select “Yes”, and then press
ENTER.
5
i.LINK Autoswitch
Standby Mode
Recording Mode
Yes No
Press a/b to select “i.LINK setup”, and then
press ENTER.
3
LC-45GX6U(E)-060-065 04.7.8, 8:52 AM 64