Ariens SNO-THRO 932507 - 520 EU - Manual (Page 10)

GB - 10
Install Discharge Chute and Chute
Crank (932037, 039, 505, 507, 508)
(Figure 5, 6, and 7)
NOTE: See Figure 5 for the items to install on
the unit.
1. Grease chute seat (if not already
greased).
2. Remove hardware (and chute crank
support bracket on models 932037, 039,
505, 508) from top of engine (Figure 6).
3. Install discharge chute by positioning the
chute ring under retainer clip on chute
seat.
4. Install chute support bracket (and chute
crank support bracket on models 932037,
039, 505, 508) to engine with hardware
removed in step 2.
5. Loosen mounting nut on chute bracket
and move discharge chute up or down
until chute ring is centered between
retainer clip and chute seat. Tighten
hardware (Figure 7).
6. Slide chute crank through support
bracket.
7. Install chute crank to pinion with spring
clip.
Figure 4
1. Wing Knob
2. J-Bolt 3. Lower Handlebar
4. Upper Handlebar
1
OS3000
2
4
3
Figure 5
OS3500
3
2
1
1. Discharge Chute
2. Spring Clip 3. Chute Crank
4. Pinion
4
Figure 6
OS4000
7
3
8
1. Discharge Chute
2. Spring Clip
3. Chute Crank
4. Hardware 5. Chute Support
Bracket
6. Chute Crank
Support Bracket
7. Chute Seat
8. Retainer Clip
2
932037, 039, 505, 508 932507
4
4 5
5 4 6
1