Summers 3Pt Supersprayer - Manual (Page 36)

30
SECTION 3 - SPRAYER OPERATION
USING CHEMICALS?
HIGH HAZARD REQUIRES:
*goggles
*respirator
*avoid fumes
*rubber gloves and skin protection
MODERATE HAZARD REQUIRES:
*goggles
*avoid fumes
*rubber gloves and skin protection
LOW HAZARD REQUIRES:
*avoid fumes
*rubber gloves and skin protection
PROTECT YOURSELF!
1. REFER TO SIGNAL WORD AND REQUIRED PERSONAL
PROTECTIVE EQUIPMENT WHEN USING CHEMICALS.
2. ALWAYS READ AND FOLLOW CHEMICAL MANUFACTURERS’
WARNINGS, INSTRUCTIONS AND PROCEDURES BEFORE
USING.
3. HANDLE CHEMICALS WITH EXTREME CARE.
4. IN CASE OF POISONING, GET IMMEDIATE MEDICAL ATTEN-
TION. A CONTAINER LABEL MAY BE BENEFICIAL FOR
QUICK TREATMENT.
5. BE SAFE!
3. ADD CHEMICAL TO MAIN TANK
A. ADD CHEMICAL TO MAIN TANK by using one of the following methods:
1. Add chemical through top fill well.
2. Add chemical through optional mix and fill kit.
4. ADJUST MANUAL VALVE FOR AGITATOR CONTROL
IMPORTANT!
1. BECAUSE OF THE WIDE RANGE OF SPRAYING CONDITIONS, THE OPERATOR IS RESPONSIBLE FOR
ACCOMPLISHING BOTH PROPER AGITATION AND DESIRED APPLICATION RATE.
2. UNDER MOST SPRAYING CONDITIONS, THE MANUAL VALVE SHOULD BE FULLY OPEN.
3. BE SURE JET AGITATORS ARE NOT PLUGGED.
4. MIX CHEMICAL THOROUGHLY BEFORE SPRAYING.