Triton Isis - Manual (Page 216)

June 2004 Isis® Sonar User's Manual, Volume1 202
Table 9-6. Sample file output extracted from telemetry
Record Record’s Contents
1 24 JUL 1995 01:01:35.44 47.6619967 -122.2421417 13.7 -6.10
+1.71 4.50 33.4 8.0 90.0 +31.20 +0.00 +0.00 +0.00 +0.00
+0.00 0 0.000000 0.000000 0.000000
2 24 JUL 1995 01:01:35.88 47.6619967 -122.2421417 13.1 -6.35
+1.46 4.50 33.4 8.0 90.0 +31.20 +0.00 +0.00 +0.00 +0.00
+0.00 0 0.000000 0.000000 0.000000
9.10.3 Setting Up Telemetric Output for Playback
Mode
During playback of previously collected data, the output options are either
serial port output or saving to a data file. For the serial port option, the data
are output over any (or all) of the serial ports which are currently enabled in
the Isis Record Setup of the Serial Ports dialog box. The data are output at
the selected data rate and in one of two formats (SIS-1000 or SIS-7000 or
Generic, per the choices shown in Figure 9-20).
Usually the data output are the same values that appear in the Parameter
Display. For example, if altitude is being received from the towfish, altitude
will be your output; but if bottom-tracking is turned on, then altitude will
come from Bottom-Tracking instead. Additional values will be output if they
appear in the Parameter Display or if they were originally stored during data
collection.
9.10.4 Setting Up Telemetric Output for Record Mode
Beginning with Isis v224.32, telemetric data can also be output in Record
mode. You turn on this feature by specifying the TELEMOUT template,
between delimiters, in the Navigation/Telemetry Template portion of the
Serial Ports setup dialog box:
Chapter 9: Using the Tools Menu