Installation, 1 installation, 2 electrical connection – Electrolux EHF3920BOK User Manual

Page 9

Advertising
background image

MOD.
PROD.NO.
SER.NO
DATA

MOD.
PROD.NO.
SER.NO
DATA

MODEL

MODEL

MOD.

PROD.NO.

SER.NO.

03 IT
MADE IN ITALY

TYPE

230V-50Hz

IP20

0049

1

2

3

1

Stick it on Guarantee Card and send
this part

2

Stick it on Guarantee Card and keep
this part

3

Stick it on instruction booklet

8. INSTALLATION

WARNING!
Refer to the Safety chapters.

8.1 Installation

WARNING!
Read and follow the instructions
carefully. There is a risk of injury or
damage to the appliance.

• Make sure that there is no damage to

the appliance from the transportation.
Do not connect a damaged appliance.
Speak to the supplier if necessary.

• Install built-in appliances only after you

assemble the appliance into correct
built-in units and work surfaces. Make
sure that built-in units and surfaces
obey the standards.

• Obey all orders and standards in force

in the country where you use the appli-
ance (safety standards, recycling stand-
ards, electrical safety standards etc.)

WARNING!
Risk of injury from electrical cur-
rent.

• The electrical mains terminal is live.
• Make electrical mains terminal free of

voltage.

• If the fixing bracket is near to the termi-

nal block, do not let the connection ca-
ble come in contact with the edge of
the bracket.

8.2 Electrical connection

• Do not pull the mains cable to discon-

nect the appliance. Always pull the
mains plug (if applicable).

• The appliance must not be connected

with an extension cable, an adapter or
a multiple socket. There is a risk of fire.

• Do not let the power cable to heat up

to a temperature of more than 90° C.
The cable should be guided by means
of clamps fixed to the side of the cabi-
net, in order to avoid any contact with
the equipment beneath the cooktop.

• Make sure that there is access to the

mains plug after the installation.

ENGLISH

9

Advertising