Electrolux EHI8742F9K - Manual (Page 10)

• To deactivate the timer: set the
cooking zone with . Touch . The
remaining time counts back to
00
.
The indicator of the cooking zone goes
out.
When the countdown comes to an end,
the sound operates and
00
flashes.
The cooking zone deactivates.
• To stop the sound: touch
CountUp Timer ( The count up
timer)
Use the CountUp Timer to monitor how
long the cooking zone operates.
• To set the cooking zone (if more
than 1 cooking zone operate ) :
touch
again and again until the indi-
cator of a necessary cooking zone
comes on.
• To activate the CountUp Timer:
touch of the timer comes on.
When the indicator of the cooking zone
starts to flash slow, the time counts up.
The display switches between
and
counted time (minutes).
• To see how long the cooking zone
operates: set the cooking zone with
. The indicator of the cooking zone
starts to flash quickly. The display
shows the time that the cooking zone
operates.
• To deactivate the CountUp Timer:
set the cooking zone with and touch
or to deactivate the timer. The in-
dicator of the cooking zone goes out.
Minute Minder
You can use the timer as a Minute Mind-
er while the cooking zones do not oper-
ate. Touch
. Touch or of the tim-
er to set the time. When the time comes
to an end, the sound operates and
00
flashes.
• To stop the sound: touch
4.10 STOP+GO
The function sets all cooking zones
that operate to the lowest heat setting (
).
When operates, you cannot change
the heat setting.
The
function does not stop the timer
function.
• To activate this function touch
.
The symbol comes on.
• To deactivate this function touch .
The heat setting that you set before
comes on.
4.11 Lock
When the cooking zones operate, you
can lock the control panel, but not
. It
prevents an accidental change of the heat
setting.
First set the heat setting.
To start this function touch
. The sym-
bol comes on for 4 seconds.
The Timer stays on.
To stop this function touch
. The heat
setting that you set before comes on.
When you stop the appliance, you also
stop this function.
4.12 The Child Safety Device
This function prevents an accidental oper-
ation of the appliance.
To activate The Child Safety Device
• Activate the appliance with . Do not
set the heat settings.
• Touch for 4 seconds. The symbol
comes on.
• Deactivate the appliance with .
To deactivate The Child Safety Device
• Activate the appliance with . Do not
set the heat settings. Touch for 4
seconds. The symbol comes on.
• Deactivate the appliance with .
To override The Child Safety Device
for only one cooking time
• Activate the appliance with . The
symbol comes on.
• Touch for 4 seconds. Set the heat
setting in 10 seconds. You can oper-
ate the appliance.
• When you deactivate the appliance with
, The Child Safety Device operates
again.
10 www.electrolux.com