Steffy Wood Products 27" High Two Shelf Storage - Manual (Page 2)

2
Attach the divider to the shelves and bottom panel using the
connecting bolts and hex wrench. Be sure the rounded edge
is facing front as you attach the divider.
3
Slide the back panels into the slots in the top, shelf and
bottom panels. The back panels can be attached with
the wood grain on the inside or outside. Be sure each
panel is in the slot on the assembled side.
4
Attach the remaining side panel making sure the
backs, top, shelf and bottom panels are in the slots
in the side.
Go back and check to make sure all connecting
bolts are tight.
DIVIDER
ROUNDED EDGE
TOWARD FRONT
BACK PANEL
IMPORTANT!
Check all connecting bolts periodically to
make sure they are tight!
SIDE PANEL
CONNECTING BOLT