Steffy Wood Products Wall Diaper Shelf - Manual (Page 2)

2
Attach the dividers to the top, shelf and
bottom panels by inserting the plastic
connectors in the dividers to the connecting
screws on the top, shelf and bottom panels.
Be sure the rounded edge of the divider is
facing down and the slots for the back panels
are up. Using the supplied screwdriver, turn
the screw located in the plastic connector
clockwise until tight.
4
Slide the back panels into the slots as
shown. Be sure the panels are in the
slots in the assembled side panel. The
wood grain can be facing in or out.
3
Attach one side panel to the top, shelf and
bottom panel using six connecting bolts and
hex key. Be sure the slots for the back panels
are aligned.
Slots for back panel
BOTTOM
SHELF
TOP PANEL
DIVIDER
DIVIDER
DIVIDER
Rounded edge facing down
SIDE PANEL
Slots for back panels
BACK PANEL