Steffy Wood Products Two-In-One Kitchen - Manual (Page 2)

TOP BACK STRIP
LEFT SIDE PANEL
BOTTOM PANEL
SHELF
CONNECTING BOLT
CAM
CONNECING BOLT
BACK PANEL
FRONT STRIP
CAM
CONNECING BOLT
RIGHT SIDE PANEL
CONNECTING BOLT
CAM
2
Attach the shelf and bottom panel to the left side
panel using the connecting bolts and hex key.
Attach the top back strip to the side panel. Make
sure the holes in the long edge of the back strip are
facing up. Insert the holes in the end of the back
strip into the connector blots. Place a cam into
each hole making sure the arrow on the cam is
facing the connector bolt. Using a screwdriver, turn
the cam clockwise until tight. Repeat this process
for all cam screws.
3
Slide the back panels into the slots in the top
back strip, shelf and bottom panel. Be sure
the panels are completely into the slots in the
side panel.
5
Attach the front strip to the front of the side
panels using the cams and a screwdriver. Make
sure the holes on the long edge of the front
strip are facing up.
4
Attach the right side panel to the
shelf, bottom and top back strip
using the connecting bolts, hex key
and cams.
Holes facing up
Holes facing up
Slots for
back panels