Dake Model 25H - 907001 User Manual
Page 2
25H Press
2
ORDERING INFORMATION
Please order all parts by number and name. Also mention model number and serial number
as shown on the plate attached to the frame of the press. Prices for parts do not include
shipping charges.
LUBRICATION
Keep all working parts of the press well oiled for easier operation. Also keep a light film of oil
over the entire surface of the ram to prevent rust.
WARNING LABELS
To the left is the safety Alert symbol.
When you see these safety alert symbols
on your press, be alert to the potential for personal injury.
Follow recommended precautions and safe operating practices.
Carefully read all safety messages in these instructions and on your press
safety signs.
Keep safety labels in good condition. Replace missing or damaged
safety labels.
This machine is intended to be operated by one person.
This person
should be conscious of the press ram movement not only for himself but also for persons in
the immediate area of the machine.
Label 300168
Label 84487
Label 84399
Label Placement View
Label 6767
Label 607