Kestrel 4500NV Applied Ballistics Meter - Manual (Page 23)

23
sETup & OpTIOns (COnT.)
Memory Options
• Press or to scroll to one of these options:
Clear Log Go Press or to clear stored data
(will also clear Min/Max/Avg log).
Reset MMA Go Press or to clear Min/
Max/Avg data
(Chart data will remain intact).
Auto Store On Press or to turn “On”
(data will automatically store
at Store Rate) or “Off” (data
will only store when manually
captured with the button).
Store Rate* 1hr Press or to increase or
decrease frequency at which
data is stored (from 2 sec - 12
hr).
Overwrite On Press or to turn “On” (will discard
oldest data point to capture new
data when log is full) or “Off” (will not
capture new data when log is full).
Man Store On Press or to turn “On” or “Off”
(Off will disable button).
* When unit is off, data will continue to be stored unless the
2 sec or 5 sec Store Rates have been selected.
Data storage
To manually store data, press the button. The screen
will confirm data storage status.
• Data stored: verifies that data was captured and will
appear on chart.
• Full: indicates overwrite is off and data log is full.
• Off: indicates that the Manual Store button has been
disabled.
See Main Setup Menu for more information on memory.
Measurements
Use this setup to “hide” unwanted Measurement screens
from the normal Measurement navigation.