Electrix Repeater Addendum - Manual (Page 5)

Advanced MIDI RT tweaking
In some situations it may be desirable for Repeater to NOT send out MIDI RT start, stop and SPP messages. The
output of these messages can be inhibited/enabled by sending Repeater the Inhibit MIDI RT Control CC message.
When syncing via MIDI, it may be necessary to tell Repeater where the downbeat is. This is done by pressing the
tap tempo button.
CHANGES ON PAGE 35 (TEXT ADDED)...
SELECTING LOOPS VIA MIDI
Repeater uses the MIDI Bank control change messages for remote selection of loops via MIDI. They work as a MSB/LSB
pair. MSB stands for Most Significant Bit and LSB: Least Significant bit - think of it as chapter and verse. MIDI CCs
are limited to 127 values. Using MSB/LSB allows us to utilize banks of 127 to access all of Repeaters 1000+ loops.
Use the Bank Select MSB CC#0 to Select the Bank as follows:
- Bank 0 = Internal 1-16 - Bank 5= External 513-640
- Bank 1= External 1-128 - Bank 6= External 641-768
- Bank 2= External 129-256 - Bank 7= External 769-896
- Bank 3= External 257-384 - Bank 8= External 897-999
- Bank 4= External 385-512
Use the Loop Select LSB to select the loop within the bank. i.e. to select External 387, send CC#0 (Loop select MSB)
at 4, and CC #32 (Loop select LSB) at 3.
There are some other ways of moving between loops too. Try these for size:
¥ Loop select up/down via PC or CC messages.
¥ Direct loop select PC messages.
CHANGES ON PAGE 35 (TEXT CHANGED)...
By lining up a MIDI foot controller with some of the above mentioned parameters it is possible to control a Repeater
entirely with oneÕs feet. May we make a few suggestions:
Name Default PC CC Value ranges and meaning
Track 1 Record Select 0 6 80 0 - 127 64-127 (active)
Track 2 Record Select 0 7 81 0 - 127 64-127 (active)
Track 3 Record Select 0 8 82 0 - 127 64-127 (active)
Track 4 Record Select 0 9 83 0 - 127 64-127 (active)
Track 1 Level/Mute 100 16 16 0 - 127 see Appendix G
Track 2 Level/Mute 100 17 17 0 - 127 see Appendix G
Track 3 Level/Mute 100 18 18 0 - 127 see Appendix G
Track 4 Level/Mute 100 19 19 0 - 127 see Appendix G
Overdub Feedback Level 90 N/A 11 0 - 127 (no feedback - 100% feedback)
Reverse forward 10 84 0 - 127 0-63 (forward), 64-127 (reverse)
Play 0 20 85 0 - 127 64-127 (Press)
Record 0 3 86 0 - 127 64-127 (Press)
Stop 0 21 87 0 - 127 64-127 (Press)
Undo 0 1 89 0-63 (off) 64-127 (Undo) Momentary
Loop Multiply 0 0 102 0 - 127 64-127 (Press)
FX Insert 0 11 103 0 - 16 As per Appendix E
Tap Tempo 0 12 68 0 - 127 64-127 (Press)
Loop Select Up 0 4 96 0 - 127 64-127 (Action)
Loop Select Down 0 5 97 0 - 127 64-127 (Action)