Hot Max Torches VTK-HD-B - Manual (Page 11)

KDAR Company 10
Maintenance and Additional Products
General Maintenance
1. Prior to EVERY use, inspect hoses for damage.
Note: Never try to repair damaged gas hoses.
Damaged hoses should be replaced.
2. Prior to EVERY use, check all connections for
leaks.
3. Clean splatter and slag off of the outside of
welding and cutting tips as required.
4. Regularly clean tip holes with a welding tip
cleaner (Hot Max P/N 22034 or 24175).
Note: Never use oil, grease, pipe dope or Teflon
tape on any part of the VTK-HD-B equipment.
Notes: