Kenwood NXR-710/810 - Manual

NXR-710/810
NEXEDGE ® VHF/UHF Digital & Analog Base Units
DIGITAL – CONVENTIONAL MODE
• NXDN ® Digital Air Interface
• Conventional IP Networks
• Voting System Option
• AMBE+2™ VOCODER
• 6.25 & 12.5 kHz Channels
• Mixed FM/Digital Operation
• NXDN ® Scrambler Built-in
• 16 RAN Repeater Control Built-in
• 1,000 GIDs Per Site
• 1,000 UIDs Per Site
• Individual & Group Selective Call
• All Group Call
• NXR Over-the-Air Alias
FM MODES – GENERAL
• VHF: 25 & 12.5 kHz Channels
• UHF: 25 & 12.5 kHz Channels
• Built-in Scrambler
FM CONVENTIONAL MODE
• 16 QT/DQT Repeater Control Built-in
• Hang Timer / Time Out Timer / CW ID
• External FM Controller Interface
FM TRUNKED MODE
• External LTR ® Controller Interface
• External MPT Controller Interface
GENERAL FEATURES
• 136 - 174 MHz, 50W
• 400 - 470, 450 - 520 MHz, 40W
• 50 / 40W @ 50% Duty
• 25 / 25W @ 100% Duty
• 40, 100 & 150W 100% Duty
UHF Rack/ Cabinet Systems
• 50, 110 & 150W 100% Duty
VHF Rack/Cabinet Systems
• Repeater Operation
• Duplex / Simplex Base Operation
• 30 CH Scanning Base
• Two-Digit LED Display
• 6 Lighted Programmable Function keys
• Front Panel Speaker
• 4W External Speaker Audio
• Volume Control
• Program via Serial or IP
• Remote Terminal Interface
• Programmable AUX I/O's
• Power Supply Voltage Monitor
• RF Power Down Detect
• DTMF Front Panel PF key Control
• DTMF AUX Output Control
• DTMF AUX Input Monitoring
• PC Serial Interface
• Windows ® PC programming
• Flash Firmware Upgrading
http://nexedge.kenwood.com