Kenwood DDX771 - Manual (Page 41)

ENGLISH 41
SETTINGS

Adjusting the crossover frequency
1 Display the < X’over> screen.
On the <Top Menu> screen:
2 Select the item to adjust (1), then make
adjustments (2).
<HPF> Adjusts the crossover for the
front ([Front]) or rear ([Rear])
speakers (high pass filter).
<LPF> Adjusts the crossover for the
subwoofer (low pass filter).* 1
< Level> Adjusts the subwoofer level.
<Phase> Selects the phase for the
subwoofer.* 2
<Freq> Adjusts the crossover frequency.
* 1 Adjustable only when the subwoofer is activated. (Page 46)
* 2 Not selectable when <Freq> is set to <Through>.
Adjustment for video playback

Adjusting the picture
You can adjust the picture quality.
1 Display the adjustment menu.
2 Select [DIM ON ] (dimmer on) or [ DIM OFF]
(dimmer off).
3 Adjust the picture (–15 to +15).
<Bright > Adjusts the brightness.
<Contrast> Adjusts the contrast.
<Black> Adjusts the blackness.
<Color> Adjusts the color.
<Tint>* Adjusts the tint.
<Sharpness> Adjusts the sharpness.
* Adjustable only when the incoming signal is NTSC.
DDX_Entry_K.indb 41 2013/11/01 16:10