Siemens LC958BA90 - Manual (Page 32)

32
Change language
Set time
Duration of acoustic signal
Button sound
Display brightness
Contrast
Clock display
NOTE
1. Hold down the t button for approx. 3 seconds. The
”Standard settings” menu is opened. The ”Language”
settings area is lit.
2. Set the language with the rotary selector.
3. Press the t button to switch to the next settings area.
The ”Set time” settings area is lit.
1. Set the time with the rotary selector.
2. Press the t button to switch to the next settings area.
The “Acoustic signal duration” settings area is lit.
1. Using the rotary selector, adjust the acoustic signal
duration (short, medium or long).
2. Press the t button to switch to the next settings area.
The ”Button sound” settings area is lit.
1. Switch the button sound on or off with the rotary selector.
2. Press the t button to switch to the next settings area.
The “Display brightness” settings area is lit.
1. Using the rotary selector, adjust the brightness (night,
medium, day).
2. Press the t button to switch to the next settings area.
The “Contrast” settings area is lit.
1. Using the rotary selector, adjust the contrast.
2. Press the t button to switch to the next settings area.
The ”Clock display” settings area is lit.
1. Switch the clock display on or off with the rotary selector.
Please note that when the clock display is switched off, there
is no display either when the extractor hood is in an idle state
or in operating mode.
2. Press the t button to switch to the next settings area.
Language:
English
Press i button to revert to basic settings
Set clock:
0:00
Standard settings