Setting the temperature, Refrigerator compartment, Freezer compartment – Siemens KG49NSW31 User Manual

Page 30: Special functions, Timer, Switching on the function, Switching off the function, Refrigerator compartment: +6 °c, Freezer compartment: –16 °c, Lock

Advertising
background image

en

30

Setting

the temperature

Fig. "

Refrigerator compartment

The temperature can be set from +2 °C

to +8 °C.
1. Press selection button 1 until

refrigerator compartment display 2 is

activated.

2. Keep pressing +/– buttons 7 until

the required temperature is indicated.

Perishable food should not be stored

above +4 °C.

Freezer compartment

The temperature can be set from -16 °C

to -26 °C.
1. Press selection button 1 until freezer

compartment display 3 is activated.

2. Keep pressing +/- buttons until

the required temperature is indicated.

Special functions

Fig. "

timer

You can use this function to set

a period of time of 1–99 minutes. A

signal reminds you, e.g. when food is to

be taken out of the compartment after

a certain time.
A value of 20 minutes has been preset at

the factory.

m

Caution

Drinks bottles may crack if they are

stored for longer than 20 minutes in

the freezer compartment.
Switching on the function
1. Press “timer” button 10.
2. Using the +/- buttons, set the required

time.

Switching off the function

Press the “timer” button 10 twice within

3 seconds.

“eco”

The “eco” function switches

the appliance to energy-saving mode.
The appliance automatically sets

the following temperatures:

Refrigerator compartment: +6 °C

Freezer compartment: –16 °C

Switching on the function
1. Press “setup” button 4 until

the required special function is

encircled.

2. Acknowledge the selection with

the setting button “+”.
When the function is switched on,

a triangle is indicated.

Switching off the function

To switch off, reselect the special

function with the “setup” button 4 and

press the setting button “-”. The triangle

behind the function disappears and is

therefore switched off.

“lock”

The “lock” function can be used

to safeguard the appliance

from unintentional use.

Advertising