Siemens KG49NSW31 - Manual (Page 34)

en
34
“eco”
The “eco” function switches
the appliance to energy-saving mode.
The appliance automatically sets
the following temperatures:
■
Refrigerator compartment: +6 °C
■
Freezer compartment: –16 °C
Switching on the function
1. Press “setup” button 4 until
the required special function
is encircled.
2. Acknowledge the selection
with the selection button 7 “+”.
When the function is switched on,
a triangle is indicated.
Switching off the function
To switch off, reselect the special
function with the “setup” button 4
and press the selection button “–” 7.
The triangle behind the function
disappears and is therefore switched off.
“lock”
The “lock” function can be used
to safeguard the appliance
from unintentional use.
Switching on the function
1. Press “setup” button 4 until
the required special function
is encircled.
2. Acknowledge the selection
with the selection button 7 “+”.
When the function is switched on,
a triangle is indicated.
Switching off the function
To switch off, reselect the special
function with the “setup” button 4
and press the selection button “–” 7.
The triangle behind the function
disappears and is therefore switched off.
“holiday”
If leaving the appliance for a long period
of time, you can switch the appliance
over to the energy-saving holiday mode.
The temperature of the refrigerator
compartment is automatically switched
to +14 °C.
Do not store any food in the refrigerator
compartment during this time.
Switching on the function
1. Press “setup” button 4 until
the required special function
is encircled.
2. Acknowledge the selection
with the selection button 7 “+”.
When the function is switched on,
a triangle is indicated.
Switching off the function
To switch off, reselect the special
function with the “setup” button 4
and press the selection button “–” 7.
The triangle behind the function
disappears and is therefore switched off.
Energy saving mode
When the appliance is not used for
a short time, the display on the controls
switches to ECO mode.
Only the required lamps are lit with
reduced luminosity.
As soon as the appliance is in use again,
e.g. when the door is opened,
the display switches back to normal
illumination.