ADC AD-30V - Manual (Page 35)

450343 - 4 www.amdry.com 35
Tumbler Bearing Assembly
For Models Mfd. prior to August 11, 2000
Illus. No. Part No. Qty. Description
1 880220 1 1-3/4” Flange Bearing with Nylock Setscrew
2 153025 4 9/16” Lock Washer
3 152050 4 9/16-16” Hex Nut
4 150508 2 3/8-16 x 3/4” Hex Head Machine Bolt
5 153005 2 3/8” Lock Washer
6 152005 2 3/8-16” Hex Nut
7 150600 2 3/8-16 x 1-1/2” Hex Head Machine Bolt
8 153004 * 3/8” Flat Washer
9 153005 2 3/8” Lock Washer
10 152005 2 3/8-16 Hex Nut
11 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
12 153002 4 5/16” Lock Washer
13 153001 4 5/16” Flat Washer
14 150621 2 5/16-18 x 1-1/2” Hex Head Machine Bolt
15 152004 2 5/16-18 Hex Nut
16 801101 1 1-3/8” Bearing Box Assembly Complete for Models Mfd. without Rotational Sensor
(includes illus. nos. 4 through 20)
801103 1 1-3/8” Bearing Box and Support ONLY
(includes illus. nos. 4, 5, 6, 16, and 17)
801105 1 1-3/8” Bearing Box ONLY
17 801104 1 Pillow Block Bearing Support ONLY
18 880779 1 1-3/8” Pillow Block Bearing Assembly with Magnet for Models Mfd. with Rotational Sensor
880202 1 1-3/8” Pillow Block Bearing with Nylock Setscrew
19 152004 2 5/16-18 Hex Nut
20 150610 2 5/16-18 x 1-1/2” Allen Setscrew
21 101100 1 18” Pulley for Non-Reversing Models ONLY
101118 1 18-3/4” Pulley for Reversing Models ONLY
101110 1 1” Taper Lock Hub (key not included) for Reversing Models ONLY
100735 1 Shaft Key (for taper lock hub)
22 154301 2 5/16-18 x 1” Allen Setscrew
23 100713 1 1/4” x 1/4” x 7/8” Key
24 100100 1 5L-660 V-Belt (tumbler to idler) for Non-Reversing Models ONLY
100108 1 5L-680 V-Belt (tumbler to idler) for Reversing Models ONLY
25 824807 1 Rotational Sensor Assembly
* As required.